555292
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
This laser complies with class 2 according to the relevant
standard. The unit includes no servicing components.
Do not open the housing for any reason. If the unit is
damaged, have the damage repaired by an authorized
repair agent.
Laser viewing glasses are not protective glasses against
laser radiation.
ADDITIONAL SAFETY INSTRUCTIONS FOR
CROSS-CUT AND TABLE SAWS
Always wear eye protectors.
Never use the equipment in the presence of ammable
liquids or gases.
NEVER use the equipment when a cutting disc (and not
a saw disc) has been attached.
Before each use, check the saw blade for small cracks
or damages. Replace a cracked or damaged blade
immediately.
Never use saw blades made of high-speed steel (HSS).
Only use saw blades that are recommended by the
manufacturer and that ful l the EN847-1 standard. Also
make sure the riving knife is not thicker than the width of
the saw cut, and that it is not thinner than the body of the
saw blade.
Always use the accessories that are recommended by
this manual.
Select the correct saw blade for the material must be
sawn.
To reduce the generation of noise, always make sure that
the blade is sharp and clean.
Only use correctly sharpened saw blades. Never exceed
the maximum speed that is indicated on the saw blade.
Before installing the saw blade, clean the axle, the anges
(especially the assembly surfaces) and the hexagonal
nut. Incorrect mounting can lead to vibrations/knocking
or slipping of the saw blade.
Wherever possible, use the saw guard and the riving
knife with every type of application, also when sawing
material in two. Always mount the saw guard according
to the instructions in this manual. Cutting operations
are those where the saw blade cuts completely through
the workpiece, such as for instance when doing
longitudinal cuts or shortening workpieces. NEVER use
the equipment with a defective saw guard, and never tie
up the saw guard with a rope or cord. Every irregularity
in the operation of the saw guard must be immediately
corrected.
Immediately replace the saw guard and the riving knife,
after a process has been completed that required their
removal.
Prevent that the saw comes into contact with metals, such
as nails and screws. Search for and remove all nails,
screws and other foreign materials from the workpiece,
before you start to work.
Remove spanners, cut off pieces and the other items
from the saw table, before turning on the switch.
NEVER wear gloves while working; the wearing of
gloves is only recommended while cutting tools are being
replaced.
Make sure that your hands stay clear of the cutting line of
the saw blade.
NEVER stand in the cutting line of the saw blade and
NEVER let anyone else stand in that position.
Remove any adjusting keys or spanners before turning
on the power tool. A spanner or key left attached to a
rotating part of the power tool may result in personal
injury.
Do not reach out too far. Keep your feet rmly on the
ground at all times. This will enable you retain control
over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from the power
tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and
collection facilities, please ensure that they are attached
and used correctly. Using such devices can reduce dust-
related hazards.
POWER TOOL USE AND CARE
Do not expect the power tool to do more than it can. Use
the correct power tool for what you want to do. A power
tool will achieve better results and be safer if used in the
context for which it was designed.
Do not use the power tool if the switch cannot turn it on
and off. A power tool with a broken switch is dangerous
and must be repaired.
Disconnect the plug from the power source before
making adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store power tools, when not in use, out of the reach of
children and do not allow people who are not familiar with
the power tool or these instructions to operate it. Power
tools are potentially dangerous in the hands of untrained
users.
Maintenance. Check for misalignment or jammed moving
parts, breakages or any other feature that might affect
the operation of the power tool. If it is damaged, the
power tool must be repaired. Many accidents are caused
by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
jam and are easier to control.
Use the power tool, accessories and cutting tools, etc.,
in accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work which
needs to be done. Using a power tool in ways for which
it was not intended can lead to potentially hazardous
situations.
SERVICE
Your power tool should be serviced by a quali ed
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
ADDITIONAL SAFETY INSTRUCTIONS FOR
LASERS
Warning! The laser beam potentially causes eye
damage. Do not look or stare into the laser
beam.
During use, do not point the laser beam at people, directly
or indirectly through re ecting surfaces.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stomer SMS-1800-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SMS-1800-T in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info