555296
3
Zoom out
Zoom in
Previous page
1/44
Next page
3
Hot air gun
CAREFULLY READ THE INSTRUCTIONS BEFORE
YOU USE THE HOT AIR GUN!
1. ADDITIONAL SAFETY RULES
BEFORE USING THE APPLIANCE:
1. Check the following:
- Make sure the voltage of the hot air gun corresponds
with the power voltage.
- Are the mains lead and the mains plug in a good
state: strong, without ravels or damages.
2. Avoid the use of long extension cables.
3. Do not use the appliance under moist circumstances.
4. The metal mouthpiece gets hot. Watch out and do not
touch the metal mouthpiece.
5. Prevent damage of the heating element. Do not lock
or block the mouthpiece.
6. Do not leave the appliance when switched on.
7. When the appliance is not in use, it can be put away
on the collapsible support, which is on the air gun. By
collapsing this support, the air gun can easy be put
away on it. The hot air gun now stands on the support
with the mouthpiece up.
8. Do not use the appliance for drying hair or for drying
living human beings in general.
9. Do not use the appliance in a bath, above water or in
spaces where easy in ammable liquids are used.
Warning! This appliance operates at a temperature
of 200-600 degrees without visible signs of this
temperature (no ames); still there is a chance of
re risk. Watch out for the hot air stream from the
mouthpiece. This air stream can cause burns.
WHEN OPERATING THE APPLIANCE:
1. If you are going to use the hot air gun, vapours and
gas can be liberated during a short time. This can
be harmful for your health. Asthmatics can suffer hin-
drance of it.
2. Before connecting the plug to the mains voltage you
have to check if the switch is in position “0”.
3. Keep the mains lead always away from the mouth-
piece of the hot air gun.
4. Keep children and animals away from the appliance
if you are using it.
IMMEDIATELY SWITCH OFF THE APPLIANCE WHEN:
1. plug and/or cable are defective or damaged;
2. the switch is defective;
3. you smell or see smoke caused by scorched insula-
tion from the hot air gun.
2. INSTALLATION
You can work manually with this hot air gun or you
can put it in a vertical position. If you use the vertical
position the metal suspension bracket of the handgrip
must also stand vertical for supporting the handgrip on
the correct place.
3. USING THE APPLIANCE
THE HOT AIR GUN CAN BE USED FOR:
plumbing work like tube connections, solder, bowing
tubes;
removing paint, varnish and lacquer without re-risk;
quickly drying of appliances which have become wet;
drying surfaces for quick repairing;
removing self-adhesive labels in a clean way;
placing PVC labels;
blistering after sticking PVC materials can be smoo-
thed after heating;
easy removing of vinyl carpeting;
forming all synthetics with a low temperature among
which polyethylene and PVC;
forming all synthetics with a high temperature among
which acryl and plexiglass;
smelting synthetics, among which matters and foils
with PVC layer;
applying heat shrinking tubes;
• shrink wrappers;
thawing tubes and engines;
• repairing nishing layers: email of bath and house-
hold appliances;
applying epoxy powder cover layers;
repairing of ski's, surf-boards and other sports goods;
unscrewing too fast xed screws and connections.
4. BEFORE OPERATING
Before you switch on the hot air gun you have to
search for the right adapter for the mouthpiece and as-
semble it on the mouthpiece if it is still cold.
IMPORTANT: Replace the mouthpiece only:
with a stationary engine;
when the appliance is disconnected;
when the mouthpiece is cold.
5. OPERATION
Check if the mains switch is on position “0” before
you connect the apparatus;
Keep the power voltage always away from the hot air
stream and the mouthpiece.
Tip: If you want to get the best result, test all applian-
ces on a little part of the workpiece.
GB
English
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stomer SHG-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SHG-1800 in the language / languages: All languages as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info