555284
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
GB
WARTUNG
Trennen Sie die Maschine vom Netz, wenn
Sie am Mechanismus Wartungsarbeiten aus-
führen müssen.
Reinigen Sie das Maschinengehäuse regelmäßig mit
einem weichen Tuch, vorzugsweise nach jedem Ein-
satz. Halten Sie die Lüfterschlitze frei von Staub und
Schmutz. Entfernen Sie hartnäckigen Schmutz mit
einem weichen Tuch, angefeuchtet mit Seifen wasser.
Verwenden Sie keine Lösungsmittel wie Benzin, Alko-
hol, Ammonia, usw. Derartige Stoffe beschädigen die
Kunststoffteile.
Die Maschine braucht keine zusätzliche Schmierung.
Wenden Sie sich in Störungsfällen, z.B. durch Ver-
schleiß eines Teils, an Ihren örtlichen SBM Group-
Vertragshändler.
UMWELT
Um Transportschäden zu verhinderen, wird die Ma-
schine in einer soliden Verpackung geliefert. Die Ver-
packung besteht weitgehend aus verwertbarem Mate-
rial. Benutzen Sie also die Möglichkeit zum Recyclen
der Verpackung. Bringen Sie bei Ersatz die alten Ma-
schinen zu Ihren örtlichen SBM Group-Vertagshändler.
Er wird sich um eine umweltfreundliche Verarbeitung
ïhrer alten Maschine bemühen.
Circular saw
INTENDED USE
This tool is intended for lengthways and crossways cutting
of wood with straight cuts as well as angle cuts to 45°; with
the appropriate saw blades also non-ferrous metals, light
building materials and plastics can be cut
TECHNICAL SPECIFICATIONS 1
PRODUCT ELEMENTS 2
1. Handle
2. On/Off switch
3. Cutting depth adjusting lever
4. Lower guard
5. Blade bolt
6. Foot
7. Flange
8. Saw blade
10. Parallel guide knob
11. Cutting angle adjusting knob
12. Laser On/Off switch
13. Spindle-lock button
SAFETY
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
DANGER
Keep hands away from cutting area and the
blade; keep your second hand on front handle (if
both hands are holding the saw, they can not be cut
by the blade)
Do not reach underneath the workpiece (the
guard cannot protect you from the blade below the
workpiece)
Adjust the cutting depth to the thickness of the
workpiece (less than a full tooth of the blade teeth
should be visible below the workpiece)
Never hold piece being cut in your hands or
across your leg (it is important to support the work
properly to minimize body exposure, blade binding,
or loss of control)
• Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord (con-
tact with a “live” wire will also make exposed metal
parts of the tool “live” and shock the operator)
When ripping always use a rip fence or straight
edge guide (this improves the accuracy of cut and
reduces the chance for blade binding)
Always use blades with correct size and shape
of arbor holes (diamond or round) (blades that do
not match the mounting hardware of the saw will run
eccentrically, causing loss of control)
Never use damaged or incorrect blade washers
or bolts (the blade washers and bolt were specially
designed for your saw, for optimum performance and
safety of operation)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stomer SCS-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SCS-210 in the language / languages: All languages as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info