555315
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
To ensure full battery capacity, completely
charge the battery in the battery charger be-
fore using for the rst time.
Read the operating instructions of the battery
charger.
Apply the power tool to the screw/nut only
when it is switched off. Rotating tool inserts
can slip off.
When working with an application tool, pay
attention that the application tool is rmly
seated on the tool holder. When the applica-
tion tool is not rmly connected with the tool
holder, it can come loose again and not be
controlled.
The torque depends on the impact duration.
The maximum achieved torque results from
the sum of all individual torques achieved
through impact.
Check the actually reached torque with a
torque wrench.
INTENDED USE
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range
of dimension.
MAINTENANCE AND CLEANING
For safe and proper working, always keep the
machine and ventilation slots clean.
Clean the application tool, the tool holder, the
power tool’s ventilations slots, and the battery’s
ventilation slots each time after using.
AFTER-SALES SERVICE AND CUSTOMER
ASSISTANCE
Our after-sales service responds to your ques-
tions concerning maintenance and repair of
your product as well as spare parts. Exploded
views and information on spare parts can also
be found under: www.sbm-group.com
Boulonneuse sans l
AUTRES INSTRUCTIONS
DE SÉCURITÉ ET D’UTILISATION 1
MONTAGE ET MISE EN
SERVICE NETTOYAGE ET ENTRETIEN 2
AVERTISSEMENTS DE SÉCURITÉ
GÉNÉRAUX POUR L’OUTIL
Lire tous les avertissements de sécurité et
toutes les instructions. Ne pas suivre les aver-
tissements et instructions peut donner lieu à un
choc électrique, un incendie et/ou une blessure
sérieuse.
Conserver tous les avertissements et toutes les
instructions pour pouvoir s’y reporter ultérieure-
ment.
Le terme « outil » dans les avertissements fait
référence à votre outil électrique alimenté par
le secteur (avec cordon d’alimentation) ou votre
outil fonctionnant sur batterie (sans cordon d’ali-
mentation).
SÉCURITÉ DE LA ZONE DE TRAVAIL
Conserver la zone de travail propre et bien
éclairée. Les zones en désordre ou sombres
sont propices aux accidents.
Ne pas faire fonctionner les outils électriques
en atmosphère explosive, par exemple en
présence de liquides in ammables, de gaz
ou de poussières. Les outils électriques pro-
duisent des étincelles qui peuvent en ammer
les poussières ou les fumées.
Maintenir les enfants et les personnes pré-
sentes à l’écart pendant l’utilisation de l’outil.
Les distractions peuvent vous faire perdre le
contrôle de l’outil.
SÉCURITÉ ÉLECTRIQUE
Il faut que les ches de l’outil électrique soient
adaptées au socle. Ne jamais modi er la che
de quelque façon que ce soit. Ne pas utiliser
d’adaptateurs avec des outils à branchement
de terre. Des ches non modi ées et des
socles adaptés réduiront le risque de choc
électrique.
Eviter tout contact du corps avec des sur-
faces reliées à la terre telles que les tuyaux,
les radiateurs, les cuisinières et les réfrigéra-
teurs. Il existe un risque accru de choc élec-
trique si votre corps est relié à la terre.
Ne pas exposer les outils à la pluie ou à des
conditions humides. La pénétration d’eau à
l’intérieur d’un outil augmentera le risque de
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stomer SAD-18i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SAD-18i in the language / languages: English, German, French as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info