52296
29
Zoom out
Zoom in
Previous page
1/86
Next page
28
English / USA
SR 340, SR 420
Standard Setting
: Shut off the engine.
: Check the air filter and clean or
replace if necessary.
: Check the spark arresting screen (if
fitted) in the muffler and clean or
replace if necessary.
: Carefuly turn both adjusting screws
counterclockwise as far as stop:
High speed screw (H) is now open
1/4 turn
Low speed screw (L) is now open
1/4 turn
: Start and warm up the engine.
Adjusting Idle Speed
Engine stops while idling
: Turn the idle speed screw (LA)
clockwise until the engine runs
smoothly.
Erratic idling behavior, engine stalls
even after re-adjusting LA screw,
poor acceleration
Idle setting is too lean:
: Turn low speed screw (L)
counterclockwise – no further than
stop – until the engine runs and
accelerates smoothly.
Erratic idling behavior
Idle setting is too rich:
: Turn low speed screw (L) clockwise
– no further than stop – until the
engine runs and still accelerates
smoothly.
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
Fine tuning for operation at high
altitude
A slight correction of the setting may be
necessary if engine power is not
satisfactory:
: Check standard setting.
: Warm up the engine.
: Turn the high speed screw (H)
clockwise (leaner) – no further than
stop.
If the setting is too lean, there is a
risk of engine damage due to
insufficient lubrication and
overheating.
H
L
373BA043 KN
LA
L
373BA044 KN
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl SR420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl SR420 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl SR420

Stihl SR420 User Manual - German, Dutch, French, Italian - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info