52292
12
Zoom out
Zoom in
Previous page
1/44
Next page
11
Top: Ellbow fitted to fan housing
Center: Spraying attachment fitted
Bottom: Stop cock lever in vertical position
Assembly of Unit
The unit is partly disassembled for ease of shipment and
must be completely assembled before it is used for the
first time.
The tools on the underside of the unit (1 combination
wrench and 1 carburetor screwdriver) should be used for
the assembly work.
Mounting the elbow
- Line up the stops on the elbow (1) and fan housing
stub (2).
- Push the elbow (1) into the stub (2) as far as it will go.
- Fit a nut (3) into each of the molded hexagon seats on
the stub.
- Insert a screw (4) into each nut from the other side and
tighten moderately (it must still be possible to turn the
elbow).
Important: The throttle cable with integrated stop switch
wire is already connected to the control handle and the
engine and must not be kinked during assembly.
- Attach throttle cable with the retainer (5) to the pleated
hose.
Mounting the spraying attachment
Insert extension tube (12) into the pleated hose (7) as far
as it will go.
- Rotate the pleated hose (7) to the left
(counterclockwise) as far as the stop and leave it in
that position until you have completed the following
adjustments.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl SR400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl SR400 in the language / languages: English as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info