537348
22
Zoom out
Zoom in
Previous page
1/84
Next page
SR 200
English
20
Multiply the required quantity of active
ingredient for 1 hectare by the area
determined in hectares. The result is the
quantity of active ingredient required for
the area to be treated.
Example:
According to the maker’s instructions,
0.4 liters of active ingredient are
required per hectare to obtain a
concentration of 0.1%.
Quantity of active ingredient:
0.4 (l/ha) x 0.36 (ha) = 0.144 l
Determining quantity of solution
The quantity of solution required is
calculated as follows:
T
W
= Quantity of active ingredient in l
K = Concentration in %
T
B
= Required quantity of solution in l
Example:
The calculated quantity of active
ingredient is 0.144 liters. According to
the maker’s instructions, the
concentration is 0.1%.
Quantity of solution:
Determining walking speed
Carry out a trial run with the machine
fueled and the container filled with
water. Operate the spray tube (swing it
back and forth) as for the real run
described below. Determine the
distance walked in one minute.
Also use the trial run to check the
selected working width. The best
working width for low-growing crops is
4–5 m. Mark the working width with
stakes.
Dividing the distance walked in meters
by the time in minutes gives you the
walking speed in meters per minute
(m/min).
Example:
The distance covered in one minute is
10 meters.
Walking speed:
Determining discharge rate
The setting of the metering unit is
calculated as follows:
V
a
= Quantity of solution
v
b
= Walking speed
V
c
= Discharge rate
b = Working width
A = Area
Example:
The values determined above and a
working width of 4 meters require the
following setting on the metering unit:
Hectares (ha) have to be converted into
m
2
(ha x 10,000 = m
2
).
To adjust the required discharge rate
see "Metering Unit".
T
W
x 100 = T
B
K
0.144 l
x 100 = 144 l
0,1 %
10 m
= 10 m/min
1min
V
a
(l) x v
b
(m/min) x b(m)
= V
c
(l/min)
A (m
2
)
144 l x 10 (m/min) x 4m
= 1.6 l/min
3,600 m
2
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl SR 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl SR 200 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl SR 200

Stihl SR 200 User Manual - German, Dutch, French, Italian - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info