667192
34
Zoom out
Zoom in
Previous page
1/80
Next page
RMA 510
English
32
Troubleshooting
Always remove the fuse key and battery before carrying out any inspection, maintenance or cleaning on the mower.
Condition Cause Remedy
Machine does not start when switched on
No electrical contact between power tool
and battery
Remove the battery, visually check con
-
tacts and re-insert battery
Battery has low charge
(1 LED on battery flashes green)
Recharge the battery
Battery too hot / too cold
(1 LED on battery glows red)
Allow battery to cool down / allow battery
to warm up slowly at temperatures of
about 15°C - 20°C (60°F - 70°F)
Malfunction in battery
(4 LEDs on battery flash red)
Take the battery out of the power tool
and re-insert it. Switch on the machine –
if the LEDs continue to flash, the battery
has a malfunction and must be replaced.
Fuse key not inserted Insert the fuse key
Malfunction in fuse key Replace fuse key
Power tool too hot
(3 LEDs on battery glow red)
Allow power tool to cool down
Electromagnetic problem or malfunction
in machine
(3 LEDs on battery flash red)
Take the battery out of the power tool
and re-insert it. Switch on the power tool
– if the LEDs still flash, the power tool
has a malfunction and must be checked
by a servicing dealer
1)
Motor overloaded by overlong or damp
grass.
Do not start the motor in overlong grass,
adjust cutting height to suit conditions
Mower housing blocked Clean mower housing
Moisture in power tool and/or battery Allow power tool / battery to dry
Machine cuts out during operation
Battery or power tool's electronics too
hot
Take battery out of machine, allow bat
-
tery and machine to cool down
Electrical or electromagnetic malfunction Remove the battery and re-insert it
Mowing overlong grass or at too low a
cutting height
Allow power tool to cool down, adjust
cutting height to suit conditions
Feed speed too high Allow power tool to cool down, reduce
speed
Cooling air inlets dirty Allow power tool to cool down, clean
cooling air openings in motor housing
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RMA 510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RMA 510 in the language / languages: English, Spanish as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info