667192
27
Zoom out
Zoom in
Previous page
1/80
Next page
RMA 510
English
25
The type of blade initially supplied with
the mower depends on the market.
Checking the Blade
N Put the mower in the cleaning
position.
N Clean the cutting blade and inspect
it for damage (nicks or cracks) and
wear, replace if necessary.
Always check the mounting screw (1)
and washer (2) when replacing the
cutting blade.
WARNING
To reduce the risk of blade detachment
and resulting injury, always replace a
damaged mounting screw and washer.
N Use a caliper gauge to check blade
thickness at a minimum of 5
different points.
N Place a ruler on the front edge of the
blade and measure how far it has
been filed back.
Blade thickness must not be less than
a = 0.118 in. at any point.
Angle ‘b’ must be 30°.
Blade width at its narrowest point must
be at least c = 1.772 in..
Removing the Cutting Blade
N Use a suitable piece of wood (2) to
block the cutting blade (1).
N Take out the mounting screw (3)
and remove the washer (4).
N Check the blade mounting screw (3)
and washer (4) for damage.
N Remove the cutting blade (1).
Sharpening Instructions
WARNING
STIHL recommends that you have the
blade resharpened by your STIHL
servicing dealer. An incorrectly ground
cutting blade (wrong sharpening angle,
out-of-balance) can cause operational
problems and could cause the blade to
break or fracture, resulting in severe
personal injury or death to the operator
or bystanders.
N Cool the cutting blade during
resharpening, e.g. with water.
N Sharpen the cutting blade uniformly
to avoid out-of-balance and
vibrations.
N Sharpen the cutting edges to an
angle of 30°.
N Use fine emery paper to remove any
burrs from the cutting edges after
resharpening.
Installing the Cutting Blade
N Clean mounting faces and
thread (1).
Sharpening Instructions
0000-GXX-2659-A0
2
1
0000-GXX-2660-A0
b
a
c
0000-GXX-2661-A0
2
4
3
1
0000-GXX-2662-A0
1
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RMA 510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RMA 510 in the language / languages: English, Spanish as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info