Manual Stihl RMA 410 C (page 12 of 72) (English, Spanish)

667191

Zoom out

Zoom in

1/72

RMA 410 C

English

Switch off the motor immediately by

releasing the switch lever if you are

approached.

WARNING

Avoid contact with electrical cables or

wires – risk of electric shock.

Operate the mower at walking pace only

– never run.

Always switch off the motor by releasing

the switch lever before wheeling the

mower over surfaces other than grass,

to and from the grassed area, and when

you remove the grass box.

The mower must not be used for

transporting persons, particularly

children, or objects.

Do not attach objects to the handlebar.

WARNING

During cutting, check the tightness and

the condition of the cutting blade at

regular short intervals with the motor

and blade stopped and the fuse key and

battery removed. If the behavior of the

blade changes during use, switch off the

motor immediately, wait until the cutting

blade stops, remove the fuse key and

battery and check the screw securing

the blade for tightness and the blade for

cracks, wear and damage. Never

examine the cutting blade while the

motor is running. To avoid the risk of

injury from the rotating cutting blade,

never open the ejection chute shield or

remove the grass box while the motor is

running.

If the machine should start to vibrate

abnormally, stop the motor, remove the

fuse key and battery and check for the

cause immediately. Vibration is

generally a warning of trouble. Do not re-

start the motor until the cause of the

abnormal vibration is identified and

resolved.

WARNING

If the cutting blade becomes obstructed,

or if there is a blockage in the ejection

chute or in the area of the cutting blade,

always switch off the motor, remove the

fuse key and battery and make sure the

cutting blade has stopped before

cleaning.

In the event of contact with foreign

matter, check the cutting blade for signs

of damage. Do not operate your mower

with a damaged or bent blade shaft or

motor shaft.

WARNING

To reduce the risk of unintentional

rotation of the cutting blade and severe

personal injury or death, always switch

off the motor and remove fuse key and

battery before replacing the cutting

blade. Always switch off the motor by

releasing the switch lever before

adjusting the cutting height.

WARNING

Do not overload your mower during

operation to a point where the motor

slows down. If motor speed begins to

slow, select a higher cutting height or

reduce the feed rate.

Switching the mower on and off

frequently within a short period may

cause the motor to overheat.

If the motor is thermally overloaded

during operation, it is designed to cut out

automatically and must cool down

before it is restarted. Causes of

overload:

– Mowing overlong grass or cutting

height set too low.

– Feed rate too high from walking too

fast.

– Dirty cooling air inlets (intake slots).

Do not mow at temperatures below

41 °F (5 °C).

Do not mow wet grass.

Do not leave the mower outdoors in the

rain.

MAINTENANCE, REPAIR AND

STORING

If you make a warranty claim for a

component which has not been serviced

or maintained properly or if

nonapproved replacement parts were

used, STIHL may deny coverage.

Do not rely on the

mower’s insulation

against electric shock. To

reduce the risk of electro-

cution, never operate this

mower in the vicinity of

any wires or cables

(power, etc.) which may

be carrying electric

current.

The drive motor is not

waterproof. Never work

with the lawn mower in

the rain or in wet or very

damp locations.

Power starter button keeps falling out. How to hold it in place Submitted on 23-10-2021 at 07:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RMA 410 C in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stihl RMA 410 C Manual

Product: