667184
12
Zoom out
Zoom in
Previous page
1/76
Next page
RMA 370
English
10
WARNING
To reduce the risk of unintentional
rotation of the cutting blade and injury,
always switch off the motor and remove
fuse key and battery before replacing
the cutting blade. Always switch off the
motor by releasing the switch lever
before adjusting the cutting height.
WARNING
Do not overload your machine during
operation to a point where the motor
slows down. If motor speed begins to
slow, select a higher cutting height or
reduce the feed rate.
Switching the machine on and off
frequently within a short period may
cause the motor to overheat.
If the motor is thermally overloaded
during operation, it is designed to cut out
automatically and must cool down
before it is restarted. Causes of
overload:
Mowing overlong grass or cutting
height set too low.
Feed rate too high from walking too
fast.
Dirty cooling air inlets (intake slots).
Do not mow at temperatures below
41 °F (+5 °C).
Do not mow wet grass.
Do not leave the machine outdoors in
the rain.
MAINTENANCE, REPAIR AND
STORING
If you make a warranty claim for a
component which has not been serviced
or maintained properly or if
nonapproved replacement parts were
used, STIHL may deny coverage.
WARNING
Use only identical STIHL replacement
parts for maintenance and repair,
including the cutting blade. Use of non-
STIHL parts may cause serious or fatal
injury.
Strictly follow the maintenance and
repair instructions in the appropriate
section of your instruction manual.
Please also refer to the maintenance
chart in this manual.
WARNING
Always switch off the motor, remove the
fuse key and battery and make sure that
the cutting blade is stopped before doing
any maintenance or repair work or
cleaning the power tool. Do not attempt
any maintenance or repair work not
described in your instruction manual.
Have such work performed by your
STIHL servicing dealer only.
Tighten all nuts, bolts and screws after
each use.
Regularly check the electrical contacts
and ensure that the insulation of the
power cord and plug of the charger is in
good condition and shows no sign of
aging.
Electrical components, e.g. power cord
of charger, may only be repaired or
replaced by a qualified electrician.
Clean plastic components with a cloth.
Do not use aggressive detergents. They
may damage the plastic.
Clean cooling air openings in motor
housing as necessary.
Do not spray the machine with water.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Keep the battery guides free from
foreign matter – clean as necessary.
Maintain or replace warning and
instruction labels as necessary.
Store the power tool in a dry, locked
location with the fuse key and battery
removed and out of reach of children.
Do not rely on the tool’s
insulation against elec-
tric shock. To reduce the
risk of electrocution,
never operate this power
tool in the vicinity of any
wires or cables (power,
etc.) which may be carry-
ing electric current.
The drive motor is not
waterproof. Never work
with the lawn mower in
the rain or in wet or very
damp locations.
Always remove the fuse
key and battery from the
lawn mower before carry-
ing out any repairs or
maintenance work, such
as replacing the cutting
blade. This avoids the
risk of the motor starting
unintentionally.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RMA 370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RMA 370 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info