537169
38
Zoom out
Zoom in
Previous page
1/220
Next page
RE 108, RE 118, RE 128 PLUS
English
36
Connection to the drinking water main
When hooking up to the drinking water
main, a backflow preventer (in
accordance with IEC/EN 60335-2-79)
must be installed between the water tap
and the hose.
If drinking water has passed through the
backflow preventer, it can no longer be
regarded as drinking water.
Follow the rules laid down by the local
water supply company to prevent water
flowing back from the high-pressure
cleaner into the drinking water main.
The high-pressure cleaner can only be
used in suction operation with the
suction set (special accessory).
NOTICE
As a rule, it is advisable to use a water
filter.
N Connect the machine to the
pressurized water supply and start it
up briefly in accordance with the
Instruction Manual
N Switch off the machine
N Disconnect the spray attachment
from the high-pressure hose
N Unscrew the hose coupling from the
water connection
N Connect the suction set to the water
connection with the included
connector
Always use the connector included in
the suction set. The hose couplings
included as standard with the high-
pressure cleaner are not leakproof in
suction operation and thus are not
suitable for drawing in water.
N Fill the suction hose with water and
immerse the suction cup of the
suction hose in the water tank – do
not use dirty water
N Hold down the high-pressure hose
by hand
N Switch on the machine
N Wait until a steady jet exits the high-
pressure hose
N Switch off the machine
N Connect spray attachment
N Switch on the machine with the
spray gun open
N Actuate the spray gun several times
briefly in order to bleed the air out of
the machine as quickly as possible
003BA003 KN
Connecting to a pressureless
water supply
38


Need help? Post your question in this forum.

Forumrules
1

Forum

stihl-re128-plus

Reset search

  • I have 128 plus no power to motor although electric working perfect Submitted on 29-6-2020 at 13:05

    Reply Report abuse
  • No power at motor although was working and electric all correct Submitted on 29-6-2020 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RE128 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RE128 PLUS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info