537339
60
Zoom out
Zoom in
Previous page
1/220
Next page
RE 661, RE 661 PLUS, RE 961 PLUS
English
58
N Undo screw (1) and remove flame
sensor
N Carefully clean the flame sensor (2)
with a soft cloth
N Installation: Insert the flame sensor
to the mark; the mark and arrow
must point upward
Clean ventilation openings
The machine must be kept clean so that
cooling air can flow freely through the
openings in the machine.
Lubricate connections
Lubricate the connections on the high-
pressure hose as needed
Check the oil level weekly.
If the pump oil is gray or white – change
the oil.
N Place the machine on a flat
horizontal surface
N Open the shroud and side cover –
see "Open shroud"
N Check that the oil is level with the
mark (2) when cold.
N If necessary, add oil (SAE 15 W 40
– see "Oil change")
First oil change after 50 hours of
operation, then every six months or
every 500 hours of operation.
N Let the machine warm up
N Open the shroud and side cover
see "Open shroud"
N Place suitable container under the
oil drain plug (1)
N Unscrew and remove the oil drain
plug (1) and through the opening in
the baseplate of the high-pressure
cleaner
N Drain oil into container
N Check the seal on the oil drain plug,
refit and tighten down the screw
N Waste oil must be disposed of in
accordance with the statutory
regulations.
Checking the oil level Oil change
1
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RE 961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RE 961 in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info