667202
17
Zoom out
Zoom in
Previous page
1/60
Next page
RB 400
English
15
Selecting the appropriate spray nozzle
The pressure washer is offered with a
range of high-pressure nozzles that can
be connected to the spray lance.
1 Narrow jet nozzle (red) jet angle 0°
Nozzle for removing stubborn dirt
from concrete and metal.
Do not use narrow jet nozzle on
wood or other soft surfaces. The
concentrated water jet can damage
the surface. (Not sold with RB 400,
RB 600)
2 Fan-jet nozzle (yellow) jet angle 15°
Nozzle for removing stubborn dirt.
3 Fan-jet nozzle (green) jet angle 25°
Universal nozzle for cleaning large
surfaces.
4 Fan-jet nozzle (white) jet angle 40°
Nozzle for cleaning sensitive
surfaces.
5 Low-pressure nozzle (black) jet
angle 65°
Nozzle for use with a detergent.
Use the low-pressure connector
and suction hose to draw detergent
from a detergent container. The
detergent is added to the water in
the high-pressure pump.
Inserting the spray nozzle
WARNING
To reduce the risk of severe laceration
and other personal injury from fluid
injection, shut off the pressure washer,
relieve system pressure and lock the
spray gun trigger before removing,
installing or adjusting any spray nozzle
or accessory.
WARNING
Confirm that the nozzle is fixed securely
in the quick-action coupling. If the high-
pressure nozzle is not secure, it can fly
out of the spray lance during operation
and cause injury.
N Shut off the pressure washer and
squeeze the spray gun trigger to
relieve system pressure
N Lock the spray gun trigger
N Remove all sand and debris from
the connection
N Pull back the coupling sleeve (1) as
far as it will go and hold it there
N Push the high-pressure nozzle (2)
as far as it will go into the coupling
N Push the coupling sleeve forward as
far as it will go
N Pull the high-pressure nozzle and
confirm that it is seated securely
Removing
N Pull back the coupling sleeve (1) as
far as it will go and hold it there
N Pull the high-pressure nozzle (2)
out of the coupling
N Release the coupling sleeve
Inserting and Removing the
Spray Nozzle
1
2
3
4
5
15°
25°
40°
65°
0 15 25 40
0000-GXX-0328-A0
0000-GXX-0329-A0
21
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RB 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RB 400 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info