667193
27
Zoom out
Zoom in
Previous page
1/60
Next page
RB 200
English
25
High-pressure pump
Troubleshooting
Before performing any inspection, maintenance, cleaning or other work on the machine, shut off the engine, turn off the water
supply and squeeze the spray gun trigger until the pressure in the system has been fully released.
Condition Cause Remedy
No or too little water coming from the
high-pressure nozzle
Pressure drops or fluctuates
Water hose kinked Remove kink
High-pressure hose kinked Replace high-pressure hose
Shortage of water Open water tap completely
Check diameter and length of intake hose
Engine speed too low Run engine at full throttle
Have the engine repaired
1)
Water intake screen clogged at inlet of high-
pressure pump
Clean water intake screen – see
"Maintenance"
Air in system Vent system by actuating the spray gun sev-
eral times at short intervals
High-pressure pump draws air Check all connections in water intake, seal if
necessary
High-pressure nozzle clogged / worn Clean high-pressure nozzle - see
"Maintenance"
Replace high-pressure nozzle
Valves in high-pressure pump worn Have the high-pressure pump repaired
1)
Gaskets in high-pressure pump worn Have the high-pressure pump repaired
1)
High-pressure pump has frozen Thaw out high-pressure pump
Water temperature too high Maintain permissible water temperature –
see “Specifications”
1)
STIHL recommends having work performed by an authorized STIHL servicing dealer
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl RB 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl RB 200 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info