52231
31
Zoom out
Zoom in
Previous page
1/90
Next page
30
English / USA
MSE 220
Indicator lamp
The indicator lamp (1) comes on in
certain operating conditions:
It lights up permanently when the
chain brake is engaged (chain locked) or
the overload circuit breaker has
interrupted the power supply.
Overload Circuit breaker
The overload circuit breaker cuts off the
power supply to the saw in case of
mechanical overload due to, e.g.
excessive infeed force
“lugging down” the motor
pinching the saw chain in the cut.
If the overload circuit breaker has cut
off the power supply:
: Pull the guide bar out of the cut.
: Wait for the overload circuit breaker
to cool down. The machine resets
automatically and is ready for
operation within a brief period.
: If necessary, disengage the chain
brake.
: Press in the reset button (2) as far
as stop.
If the motor does not start when you
switch on, the overload circuit breaker
has not cooled down sufficiently.
Once the motor starts:
: Run your saw for about 15 seconds
off-load. This helps cool down the
motor and considerably delays the
overload circuit breaker from
tripping again.
During operation
: Check level in chain oil tank.
: Fill up with fresh chain oil when the
level reaches the "min" mark - see
"Filling Chain Oil Tank".
: Start cutting with the saw chain
running.
: Always cut with a properly
sharpened chain and apply only
moderate feed pressure. The
sound and running behavior of the
saw must remain constant. The
motor speed may only drop a little in
the cut – the chain must not jerk
or stop.
: If motor noise drops suddenly or the
chain stops, reduce feed pressure
immediately to avoid overheating
and possible damage to the saw.
Overload Circuit Breaker
and Indicator Lamp
2
1
107BA011 KN
Operating Instructions
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MSE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MSE220 in the language / languages: Spanish as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MSE220

Stihl MSE220 User Manual - English - 90 pages

Stihl MSE220 User Manual - German, Dutch, French, Italian - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info