52231
26
Zoom out
Zoom in
Previous page
1/90
Next page
25MSE 220
English / USA
: Disengage the chain brake: Pull the
hand guard (3) against the front
handle.
Wear work gloves to protect your
hands from the sharp cutters.
: Fit the chain – start at the bar nose.
: Turn the guide bar so that the chain
cutting edges on the top of the bar
point towards the bar nose (see
magnified view).
: Fit the guide bar over the screws (4)
and engage the tensioning nut in the
hole (5) – place the chain over the
sprocket (6) at the same time.
: Now turn tensioning screw (7)
clockwise until there is very little
chain sag on the underside of the
bar and the drive link tangs are
located in the bar groove.
: Refit the sprocket cover and screw
on the nut fingertight.
Arrow (8) indicates direction of chain
rotation.
Go to “Tensioning the Saw Chain”.
Retensioning during cutting work:
: Disconnect plug from power supply.
: Loosen the nut.
: Hold the bar nose up.
: Use screwdriver to turn the
tensioning screw (1) clockwise until
chain fits snugly against the
underside of the bar.
: While still holding bar nose up,
tighten down the nut firmly.
: Go to "Checking Chain Tension".
Arrows (2) show direction of rotation of
chain.
107BA003 KN
3
143BA003 KN
4
4
7
6
107BA004 KN
5
8
Tensioning the Saw Chain
2
1
2
107BA005 KN
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MSE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MSE220 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MSE220

Stihl MSE220 User Manual - German, Dutch, French, Italian - 164 pages

Stihl MSE220 User Manual - Spanish - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info