52215
40
Zoom out
Zoom in
Previous page
1/146
Next page
39Rescue Saw
English / USA
At temperatures below + 50 °F
(+10 °C), preheat carburetor as
follows:
: Remove the carburetor box cover.
Inside the carburetor box cover:
: Move the shutter from summer
position (1) to winter position (2).
Heated air is now drawn in from around
the cylinder and mixed with cold air
this helps prevent carburetror icing.
: At temperatures above + 68 °F
(+20 °C):
Return shutter to summer position.
This is essential to avoid engine
running problems and overheating.
Machines with HD filter:
: Install a standard filter in place of
the HD-Filter.
: Refit the carburetor box cover and
tighten down the twist lock.
At temperatures below + 14 °F
(-10 °C):
It is advisable to fit the optional cover
plate (1128 080 7500) on the fan
housing in extremely cold conditions
(temperatures below + 14 °F (-10 °C), in
powder or drifting snow).
The cover plate blocks off the lower slots
in the fan housing to help prevent snow
being sucked into the machine.
When the cover plate is fitted, the
shutter in the carburetor box cover must
be in the winter position.
: If your saw is very cold (frost or ice
on machine), start the engine and
keep it at a high idle speed (with
chain brake disengaged) until it
reaches normal operating
temperature.
: In the event of engine running
problems, first check that conditions
for use of intake air preheating still
apply.
The four positions of the
Master Control lever
0 = Engine off
ignition is switched off.
# = Normal run position
engine runs or can fire.
To move the Master Control lever from #
to
n or l, press down the throttle
trigger interlock and squeeze throttle
trigger at the same time.
n=Warm start – this position is used to
start a warm engine. The Master
Control lever moves to the normal
run position as soon as the throttle
trigger is squeezed.
l=Cold start – this position is used to
start a cold engine.
Winter Operation
1
2
145BA040 KN
145BA041 KN
Information
Before You Start
STOP
0
001BA140 KN
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS460 Magnum Rescue Saw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS460 Magnum Rescue Saw in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS460 Magnum Rescue Saw

Stihl MS460 Magnum Rescue Saw User Manual - German, Dutch, French, Italian - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info