52209
54
Zoom out
Zoom in
Previous page
1/124
Next page
MS 441
English
52
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
STIHL single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
(breakerless)
Fuel System
All position diaphragm carburetor with
integral fuel pump
Chain Lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Weight
Cutting Attachment
Recommended cutting attachments
complying with Section 5.11 of ANSI B
175.1-2000.
Observe notes on ANSI B 175.1-2000
and definition of "reduced kickback
chain" in chapter on "Safety
Precautions".
3/8" chains
Rollomatic E guide bars with
sprocket nose
Other yellow-labeled chains and bars
for this powerhead:
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Displacement: 4.31 cu. in.
(70.7 cm
3
)
Bore: 1.97 in. (50 mm)
Stroke: 1.41 in. (36 mm)
Engine power to
ISO 7293:
5.5 hp (4.1 kW)
at 9,500 rpm
Idle speed: 2,800 rpm
Max. permissible
engine speed with
bar and chain: 13,500 rpm
Spark plug (resistor
type):
NGK BPMR 7 A
Bosch WSR 6 F
Electrode gap: 0.02 in. (0.5 mm)
Fuel tank capacity: 24.5 fl.oz
(0.725 L)
Oil tank capacity: 12.2 fl.oz
(0.36 L)
dry, without bar and chain
MS 441: 14.6 lbs. (6.6 kg)
MS 441 with handle
heating: 14.8 lbs (6.7 kg)
MS 441 with wrap-
around handle: 15.2 lbs (6.9 kg)
Reduced kickback STIHL saw chains
(with green label)
Rapid Super C3 (33 RSC3)
Rapid Super C3 (36 RSC3)
Pitch: 3/8" (9.32 mm)
Drive link gauge: 0.050 in.
(1.3 mm)/0.063 in.
(1.6 mm)
Reduced kickback STIHL guide bar
(with green label)
Bar lengths
(3/8"):
16, 18, 20, 25 in (40, 45,
50, 63 cm)
Groove width: 0.050 in.
(1.3 mm)/0.063 in.
(1.6 mm)
STIHL saw chain (with yellow label)
Rapid Micro Comfort (33 RMC)
Rapid Micro Comfort (36 RMC)
Rapid Super Comfort (33 RSC)
Rapid Super Comfort (36 RSC)
Pitch: 3/8" (9.32 mm)
Drive link gauge: 0.050 in. (1.3
mm)/0.063 in.
(1.6 mm)
STIHL E Super guide bars (with yellow
label)
Bar lengths
(3/8"):
16, 18, 20, 25 in (40, 45,
50, 63 cm)
Groove width: 0.050 in.
(1.3 mm)/0.063 in.
(1.6 mm)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS441 in the language / languages: Spanish as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS441

Stihl MS441 User Manual - English - 130 pages

Stihl MS441 User Manual - German, Dutch, French, Italian - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info