52209
59
Zoom out
Zoom in
Previous page
1/130
Next page
58
English / USA
MS 441
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
STIHL single cylinder two-stroke engine
Displacement
4.31 cu in. (70.7 cm
3
)
Bore
1.97 in. (50 mm)
Stroke
1.41 in. (36 mm)
Idle speed
2,800 rpm
Max. permissible engine speed with
bar and chain
13,500 rpm
Magneto ignition system
Electronic (breakerless)
Spark plug (suppressed),
Bosch WSR 6 F, NGK BPMR 7 A,
Electrode gap 0.02 in. (0.5 mm)
Carburetor
All position diaphragm carburetor with
integral fuel pump
Fuel capacity
1.53 US pt (0.725 l)
Oil tank capacity:
0.76 US pt (0.360 l)
Weight (without bar and chain)
MS 441: 14.5 lb (6.60 kg)
MS 441 with heated handles:
14.7 lb (6.70 kg)
Cutting Attachment
Recommended cutting attachments for
compliance with § 5.11 of ANSI standard
B 175.1-2000
(see page 13 of this manual):
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20" (40, 45 or 50 cm)
STIHL low kickback chain
1)
(with green label) for 3/8" pitch:
3/8" (9,32 mm) Rapid-Micro 2
(33 RM 2, 36 RM 2)
3/8" (9,32 mm) Rapid-Super-C 3
(33 RSC 3, 36 RSC 3)
7-tooth for 3/8" pitch
(Rimsprocket)
In order to comply with the kickback
performance requirements of § 5.11 of
ANSI Standard B 175.1-2000, do not
use replacement saw chain unless it has
been designated as meeting the ANSI
§ 5.11 requirements on this specific
powerhead or has been designated as
"low kickback" saw chain
1)
in
accordance with the ANSI B 175.1-2000
standard.
1)
See definition of "low kickback
chain" on page 16.
Specifications
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS441 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS441

Stihl MS441 User Manual - German, Dutch, French, Italian - 200 pages

Stihl MS441 User Manual - Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info