52205
48
Zoom out
Zoom in
Previous page
1/138
Next page
47MS 361 C
English / USA
Adjusting Idle Speed
Engine stops while idling
: Open the low speed screw (L) 1/4
turn.
: Turn the idle speed screw (LA)
slowly clockwise until the chain
begins to run – then turn the screw
back 1/2 turn.
Chain runs while engine is idling
: Open the low speed screw (L)
1/4 turn.
: Turn the idle speed screw (LA)
slowly counterclockwise until the
chain stops running – then turn the
screw another 1/2 turn in the same
direction.
If the chain continues moving when
the engine is idling, have your saw
checked and repaired by your
servicing dealer.
Erratic idling behavior, poor
acceleration
(although L screw is open 1/4 turn)
Idle setting is too lean:
: Turn low speed screw (L)
counterclockwise – no further than
stop – until the engine runs and
accelerates smoothly.
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
Fine tuning for operation at high
altitude
A slight correction of the setting may be
necessary if engine power is not
satisfactory when operating at high
altitude:
: Check the standard setting.
: Warm up the engine.
Turn the high speed screw (H) clockwise
(leaner) – no further than stop.
If the setting is too lean there is
a risk of engine damage due to
insufficient lubrication and
overheating.
213BA014 KN
L
L
213BA015 KN
H
L
L
H
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS361C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS361C in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS361C

Stihl MS361C User Manual - German - 52 pages

Stihl MS361C User Manual - Spanish - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info