52201
35
Zoom out
Zoom in
Previous page
1/126
Next page
34
english
MS 360
: Pry the shutter (1) out of the
carburetor box cover and slide it into
the slot (2) at the bottom end of the
carburetor box cover.
The shutter must be returned to the
"summer" position at temperatures
above +20°C. This is necessary to
avoid engine running problems and
overheating.
Fit the carburetor box cover and secure
it with the twist lock:
Preheated air from around the cylinder is
now drawn in along with cold air – this
helps prevent carburetor icing.
At temperatures below -10°C
It is advisable to fit the intake air
preheating kit* if you use your saw in
extremely cold conditions (temperatures
below -10°C, in powder or drifting snow).
When fitted, the kit ensures that only
heated air is drawn in from around the
cylinder. It prevents air filter and
carburetor icing.
The shutter for carburetor preheating
must be in the "winter" position when the
intake air preheating kit is fitted.
* see "Guide to Using this Manual"
If your saw is very cold (frost or ice on
machine), start the engine and keep it at
a high idle speed (with chain brake
disengaged) until it reaches normal
operating temperature.
The air filter may load up faster when
you use intake air preheating – clean it
more frequently.
In the event of engine running problems,
first check that conditions for use of
intake air preheating still apply.
1
138BA006K
2
138BA007K
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS360 in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info