52201
22
Zoom out
Zoom in
Previous page
1/126
Next page
21MS 360
english
Conventional cut
A = felling notch - determines the
direction of the fall
For a conventional cut:
: Properly place felling notch
perpendicular to the line of fall,
close to the ground
: Cut down at app. 45-degree angle
to a depth of about 1/5 to 1/4 of the
trunk diameter
: Make second cut horizontal
: Remove resulting 45-degree piece
Open-face technique
A = felling notch - determines the
direction of the fall
For an open-face cut:
: Properly place felling notch
perpendicular to the line of fall,
close to the ground
: Cut down at app. 50-degree angle
to a depth of app.1/5 to 1/4 of the
trunk diameter
: Make second cut from below at app.
40 degree angle
: Remove resulting 90-degree piece
Making sapwood cuts
: For medium sized or larger trees
make cuts at both sides of the trunk,
: at same height as subsequent
felling cut.
: Cut to no more than width of guide
bar.
This is especially important in
softwood in summer - it helps
prevent sapwood splintering when
the tree falls.
001BA052 KN
A
001BA042 L
Ä
001BA043 KN
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS360 in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info