537140
38
Zoom out
Zoom in
Previous page
1/132
Next page
MS 271, MS 291, MS 291 C
English
36
Versions with Easy2Start
The Easy2Start stores the energy for
starting the chain saw. For this reason, a
few seconds may pass between the
pulling of the starter rope and the
starting of the engine.
For versions with Easy2Start, there are
two ways to start the machine:
N pull the starter grip slowly and
smoothly – or – with the right hand,
pull the starter grip in several short
pulls of the starter rope, pulling the
rope out only a little bit each time
N during starting, press down on the
handlebar – do not pull out the
starter rope all the way – risk of
breakage!
N Do not let the starter grip snap back
– guide it vertically back into the
housing so that the starter rope can
rewind properly
Starting the chain saw
Versions with fuel pump
N Press the fuel pump bulb at least
five times – even if it is still full of fuel
For all versions
N Push the hand guard (1) forwards –
the saw chain is blocked
N Simultaneously press the throttle
trigger lockout (2) and throttle
trigger (3) – set master control
lever (4)
Position choke shutter closed l
if engine is cold (even if the engine
has stalled during opening of
throttle after starting)
Position starting acceleration n
if engine is warm (once the engine
has been running for approx. one
minute)
N Hold and start the chain saw
When the engine has turned over for
the first time
N Move the Master Control lever (4) to
the position starting acceleration
n
N Hold and start the chain saw
Once the engine is running
N Press the throttle trigger lockout and
blip the throttle trigger (3); the
Master Control lever (4) jumps to
the operating position F and the
engine begins to idle
There must not be anyone within
the swivel range of the chain saw.
2710BA006 KN
4
4
2
3
1
5902BA029 KN
4
4
5902BA030 KN
3
4
4
5902BA031 KN
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS271 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS271 in the language / languages: English, Spanish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS271

Stihl MS271 User Manual - German, Dutch, French, Italian - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info