52177
50
Zoom out
Zoom in
Previous page
1/148
Next page
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
48
Tensioning the Rewind Spring
N Make a loop in the starter rope and
use it to turn the rope rotor six full
revolutions in the direction of the
arrow.
N Hold the rotor steady. Pull out and
straighten the twisted rope.
N Release the rope rotor.
N Release the rope slowly so that it
winds onto the rotor.
The starter grip must sit firmly in the rope
bushing. If the grip droops to one side:
Add one more turn on the rope rotor to
increase spring tension.
N Take one turn of the rope off the
rotor.
Versions with Easy2Start
N Fit the spring housing, driver and
washer on the starter post.
N Use circlip pliers to carefully install
the circlip in the starter post groove.
All versions
N Fit the fan housing on the
crankcase.
Replacing a Broken Rewind Spring
N Removing the Rope Rotor
N Carefully remove the parts of the
spring.
N Lubricate the new spring with a few
drops of non-resinous oil.
N Place the new spring with frame in
position in the fan housing – the
anchor loop must engage the lug in
the housing.
N Apply suitable tools (screwdriver,
punch, etc.) to the recesses and
push the spring into its seat in the
fan housing – it slips out of the
frame in this process.
N Take the frame out of the fan
housing.
N Reinstall the rope rotor, tension the
rewind spring, fit the fan housing
and secure it in position.
When the starter rope is fully
extended it must still be possible
to rotate the rotor another half
turn. If this is not the case, the
spring is overtensioned and could
break.
108BA014 KN
The bits of spring may still be
under tension and could fly apart
when you take them out of the
housing. To reduce the risk of
injury, wear face protection and
work gloves.
001BA126 KN
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS210 in the language / languages: Spanish as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS210

Stihl MS210 User Manual - English - 146 pages

Stihl MS210 User Manual - German, Dutch, French, Italian - 232 pages

Stihl MS210 User Manual - Spanish - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info