52171
42
Zoom out
Zoom in
Previous page
1/130
Next page
41MS 192 C
English / USA
General information
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
With this carburetor it is only possible to
correct the setting of the high speed
screw within fine limits.
Standard setting
: Shut off the engine.
: Check the air filter and clean or
replace if necessary.
: Check the spark arresting screen* in
the muffler and clean or replace if
necessary.
: Turn the high speed screw (H)
counterclockwise as far as stop (no
more than 3/4 turn).
: Carefully screw the low speed
screw down onto its seat
(clockwise).
: Open the low speed screw (L) one
full turn.
* see "Guide to Using this Manual"
Adjusting idle speed
Engine stops while idling
: Carry out standard setting on low
speed screw (L).
: Turn the idle speed screw (LA)
slowly clockwise until the chain
begins to run – then turn the screw
back two full turns.
Chain runs when engine is idling
: Carry out standard setting on low
speed screw (L).
: Turn the idle speed screw (LA)
slowly counterclockwise until the
chain stops running – then turn the
screw another two full turns in the
same direction.
Erratic idling behavior, poor
acceleration
: Carry out standard setting on low
speed screw (L).
Idle setting is too lean:
: Turn low speed screw (L)
counterclockwise until the engine
runs and accelerates smoothly.
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
Adjusting the Carburetor
151BA018 KN
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS192 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS192

Stihl MS192 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info