52171
29
Zoom out
Zoom in
Previous page
1/130
Next page
28
English / USA
MS 192 C
: Refit the sprocket cover – engage
hand guard pivot pin in the bore
(see arrow). Fit the nut on the stud
and tighten it moderately by hand.
: Go to chapter “Tensioning the Saw
Chain”.
Retensioning during cutting work:
: Shut off the engine –
and then loosen the nut.
: Hold the bar nose up and use
screwdriver to turn the tensioning
screw (1) clockwise until chain fits
snugly against the underside of the
bar.
: While still holding the bar nose up,
tighten down the nut firmly.
: Go to chapter on “Checking Chain
Tension”.
A new chain has to be retensioned more
often than one that has been in use for
some time.
: Check chain tension frequently –
see chapter on “Operating
Instructions”.
: Shut off the engine.
: Wear work gloves!
: Chain must fit snugly against the
underside of the bar – and, with the
chain brake disengaged, it must still
be possible to pull the chain along
the bar by hand.
: If necessary, retension the chain.
A new chain has to be retensioned more
often than one that has been in use for
some time.
Check chain tension frequently!
see chapter "During Operation".
151BA003 KN
Tensioning the Chain
1
142BA063 KN
Checking Chain Tension
142BA064 KN
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS192 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS192

Stihl MS192 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info