537133
160
Zoom out
Zoom in
Previous page
1/174
Next page
159MS 241 C
The black lead of the handle heating
must be routed underneath the gray
lead of the wiring harness.
: Press the leads of the handle
heating and the wiring harness
into the guide (arrows)
Reassemble remaining parts in
reverse order
14.6 Heating element in front
handle
The heating element in the front
handle cannot be replaced. In case
of damage, the complete front
handle must be replaced.
Check heating element
Remove the handle molding,
b 11.2
The functioning of the heating
element in the front handle can be
checked simply using the following
test procedure.
Disconnect the plug connections
of the heating element at the
handle
Carry out measurement between
the two socket terminals and the
contact sleeve.
Set heating switch to F
2410RA399 TG
: Clip one test lead to the terminal
socket (1) of the thick connecting
lead and the second to the
contact sleeve of the heating
switch
If the heating element is intact, the
ohmmeter will indicate a value
of approx. 6.4 Ω
(reading 6.0...8.0 Ω) in the
measuring range "Ω".
If the reading obtained is outside
this tolerance, then the front
handle (front handle heating
element) must be checked directly
at the connecting leads.
Disconnect plug connections at
the front handle, b 10.4.1
: Clip test leads to the
connectors of the leads (1)
and (2)
If the heating element is intact, the
ohmmeter will indicate a value
of approx. 6.4 Ω
(reading 6.0...8.0 Ω) in the
measuring range "Ω".
100
50
30
20
10
5
0
20
10
5
2410RA400 TG
1
00
50
30
20
10
5
2410RA404 TG
2
1
If the reading obtained is outside
this tolerance, then the front
handle (front handle heating
element) must be replaced,
b 10.4.1.
Is the heating element inoperable
despite a successful resistance
measurement?
Remove and examine
connecting lead to front handle
heating element, replace if
necessary, b 14.9
Examine wiring harness, replace
if necessary, b 14.3, b 14.8
Test generator and heating
switch, replace if necessary,
b 14.7, b 14.4
Reassemble parts in reverse
order
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 241 C-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 241 C-M in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 241 C-M

Stihl MS 241 C-M User Manual - German, Dutch, French, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info