537133
33
Zoom out
Zoom in
Previous page
1/174
Next page
32 MS 241 C
5.7.2 Chain catcher
Remove the chain sprocket cover
: Remove screw (1) and pull out
chain catcher (2) under the
bumper strip
Reassemble parts in reverse
order
5.8 Bar mounting stud
Remove the chain sprocket cover
: Push stud driver (1)
5910 893 0501 onto the stud (2)
as far as it will go and unscrew
counterclockwise
Coat stud with Loctite, screw in
and tighten, b 16
2410RA300 TG
2
1
2410RA065 TG
2
1
Reassemble remaining parts in
reverse order
5.9 Collar nut for chain
sprocket cover
This chain sprocket cover can only
be used on the MS 241.
It cannot be retrofitted to other
models. The length and shape of
the stud must be appropriate for the
chain sprocket cover with captive
nut.
The special tool stud
5910 893 9600 is available for
replacing the nut.
Remove the chain sprocket cover
: Screw the assembly tool (1)
5910 893 9600 with the short
stud into the collar nut (2) as far
as it will go
2410RA066 TG
12
Flip over the chain sprocket cover
and clamp the assembly tool into
a vise by the hexagon
: Drill out the collar nut with an
11 mm diameter drill bit – the
base in the chain sprocket cover
must not be drilled out
Pull out the collar nut
Unscrew the assembly tool from
the collar nut
2410RA067 TG
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 241 C-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 241 C-M in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 241 C-M

Stihl MS 241 C-M User Manual - German, Dutch, French, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info