537133
30
Zoom out
Zoom in
Previous page
1/174
Next page
29MS 241 C
: Examine cam lever (1) and brake
spring (2) and replace if
necessary
: Check condition of cam
guide (arrow) and replace hand
guard if necessary
Examine all pins and replace if
necessary,
b 5.6
Installation
Clean pins and disassembled
parts, b 16
Grease pins, b 16
: Orient cam lever (1) so that the
cam (arrow) faces the pin (3)
: Slide cam lever (1) onto anchor
pin (2)
2410RA049 TG
1
2
2410RA050 TG
3
1
2
: Push circlip (1) into place
: Hook brake spring (1) into the
brake lever so that the opening of
the anchor loop (arrow) is visible
: Hook brake spring (1) onto
pin (2)
Grease cam lever, b 16
The cam lever is not yet tensioned –
the spring may become detached
again.
Reassemble remaining parts in
reverse order
2410RA051 TG
1
2410RA052 TG
2
1
5.6 Pins
The pins ensure that the springs are
securely mounted. They must
therefore be replaced when worn,
otherwise the springs may pop out.
The pins must be driven in square.
For reasons of simplicity, the parts
connected to the pins have already
been removed in the following
illustrations.
: Remove pins (1) through (6)
Item 6 is present only in the version
with QuickStop Super.
2410RA053 TG
132
6
54
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 241 C-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 241 C-M in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 241 C-M

Stihl MS 241 C-M User Manual - German, Dutch, French, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info