537133
26
Zoom out
Zoom in
Previous page
1/174
Next page
25MS 241 C
: Turn cam lever (1) aside until
cam of hand guard (arrow) slides
past
Press bearing eye of hand guard
and brake lever onto the anchor
pins
: Check seat of the sleeve (1) at
the brake cable, push completely
into the hole in the
housing (arrow) if necessary
: Hook brake spring (1) into the
brake lever so that the opening of
the anchor loop (arrow) is visible
1
2410RA034 TG2410RA035 TG
1
1
2410RA036 TG
2
: Attach brake spring (1) to anchor
pin (2)
The turns of the brake spring must
be tightly spaced when not installed;
use a new brake spring if necessary.
Position the protective tube so
that it starts after the
second turn (arrow)
The pin for the brake spring must
be replaced if it shows signs of
wear at the groove, b 5.6
: Hook brake spring (1) onto brake
lever (arrow)
5902RA040 TG
1
2410RA037 TG
: Use the assembly tool
1117 890 0900 to hook the brake
spring (1) onto the anchor
pin (arrow)
Grease brake lever, cam lever
and hand guard motion link,
b 16
Adjust brake cable, b 5.4.1
Reassemble remaining parts in
reverse order
5.4.1 Adjusting brake cable
If the coasting brake does not
operate properly although the brake
band is intact, it may be necessary
to adjust the brake cable.
Troubleshooting, b 3.2
Check condition and play
Remove chain brake cover,
b 5.2
When the trigger interlock is not
pressed, the brake cable must
be without tension.
1
2410RA025 TG
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 241 C-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 241 C-M in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 241 C-M

Stihl MS 241 C-M User Manual - German, Dutch, French, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info