537133
8
Zoom out
Zoom in
Previous page
1/174
Next page
7MS 241 C
Fastener Thread size For component Tightening
torque
Nm
Comment
Carrier M 12x1 L Crankshaft carrier 50.0
Screw D 4x12 Oil pump / crankcase 4.0 2), 4)
Screw M 5x16 Muffler / crankcase 10.0 2), 3)
Screw M 5x16 Muffler / cylinder 10.0 2), 3)
Nut M 8x1 Flywheel / crankshaft 28.0 5)
Nut M 12x0.75 Switch 2.0
Screw P 4x10 Support 1.0
Screw D 4x12 Pre-separator / crankcase 4.0 2), 4)
M 10x1 Spark plug / cylinder 12.0
Screw D 4x20 Control unit / cylinder 4.5 2), 4)
Screw M 5x20 Cylinder / crankcase 1st stage 4.0 2), 4)
Screw M 5x20 Cylinder / crankcase 2nd stage 10.0 2), 4)
Remarks:
1) Loctite 242 or 243 medium strength
2) Screws with locking serration
3) Microencapsulated screws
4) Screws with easy-slide coating
5) Connection between crankshaft and flywheel must be degreased and oil-free
Q) QuickStop Super
B) Quick chain tensioner
VW) Heating
When inserting DG and P screws into an existing screw thread:
Insert the DG or P screw in the hole and turn counterclockwise until it gently drops into the hole in axial direction.
Tighten the screw clockwise to the specified torque.
This procedure ensures that the screw engages properly in the existing thread and does not form a new thread
and weaken the assembly.
Coat micro-encapsulated screws with Loctite 242 or 243 medium strength before refitting them.
Screwdriver speed when used in plastic material: max. 500 rpm for DG and P-type screws.
Do not use an impact wrench to release or tighten screw connections.
Screws with and without locking serration must not be confused.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 241 C-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 241 C-M in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 241 C-M

Stihl MS 241 C-M User Manual - German, Dutch, French, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info