537133
4
Zoom out
Zoom in
Previous page
1/174
Next page
3MS 241 C
1. Introduction and safety precautions
1.1 Introduction
This Service Manual contains
detailed descriptions of all the
typical repair and servicing
procedures for this machine.
Refer to the illustrated spare parts
lists during all repair work. These
lists show the installation position
and order in which the individual
parts and modules should be
assembled.
Refer to the latest edition of the
relevant spare parts list to check the
part numbers of any spare parts
required.
A fault on the machine may be due
to several causes. To help locate
the fault, consult the chapter on
"Troubleshooting" and the
"STIHL Service Training System"
for all functional groups.
Refer to the "Technical Information"
bulletins for engineering changes
which have been introduced since
publication of this Service Manual.
Technical information bulletins also
supplement the spare parts list and
Service Manual until an updated
edition is issued.
The special tools mentioned in the
descriptions are listed in the chapter
"Special Servicing Tools" of this
manual. The tools can be identified
according to part number in the
"STIHL Special Tools" manual. The
manual lists all tools supplied by
STIHL.
Symbols are included in the text and
pictures for greater clarity.
The meanings are as follows:
In the text:
N Action to be taken as shown in
the illustration above the text
Action to be taken that is not
shown in the illustration above
the text
In the illustrations:
A Item pointer (short)
a Direction of
movement (long arrow)
@ 4.2 Reference to another
chapter, in this case to
Chapter 4.2
Service Manuals and technical
information bulletins are intended
exclusively for the use of properly
equipped repair shops. They must
not be passed on to third parties.
Servicing and repairs are made
considerably easier if the machine
is mounted on assembly stand (3)
5910 890 3101. For this purpose,
secure the clamp (2)
5910 850 1650 to the assembly
stand with two screws (1).
The screws must not protrude, as
they may damage the housings
when clamping the machine,
depending on the machine.
The machine is guided with the
collar screw through the upper hole
of the clamping rail and fastened
using nut M 8 (arrow).
The machine is fastened to the
mount on the clamping rail by the
screw head on the crankcase.
2710RA320 TG
2
3
1
2410RA000 TG
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 241 C-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 241 C-M in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 241 C-M

Stihl MS 241 C-M User Manual - German, Dutch, French, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info