537132
110
Zoom out
Zoom in
Previous page
1/122
Next page
109MS 240, MS 260, MS 260 C
: Inspect the magnet ring (arrow) in
the flywheel for cracks or other
damage. If damage is found,
replace the flywheel.
: Place the generator (1) in
position with the connecting wire
(arrow) facing the crankcase and
push the retainer (2) into its seat
at the same time.
: Push the centering tool (1)
1118 893 3500 onto the
crankshaft so that the slot
engages the Woodruff key – the
generator is now centered.
165RA442 TG
165RA443 TG
1
2
165RA444 TG
1
Use threadlocking adhesive,
b 17.
Insert the screws through the
holes (arrows) and tighten them
down firmly.
Tightening torques, b 3.5
Remove the centering tool (1).
: If necessary, secure the puller (2)
1107 890 4500 with screws
(arrows) and pull off the centering
tool.
: Reconnect the pin and socket
connector.
Push the insulating tube (1) over
the connector.
To reduce the risk of a short circuit,
make sure the insulating tube
completely covers the connector.
165RA445 TG
1
2
165RA446 TG
1
: Push the generator wire and
connector (1) into the guides
(arrows) as far as stop.
: The wire must be properly seated
in the guide and must not project
– bond in position if necessary
(arrow).
The retainer (1) must be pushed
fully home.
The flywheel must not touch the
generator wire.
Reassemble all other parts in the
reverse sequence.
1
165RA447 TG165RA448 TG
1
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info