537132
33
Zoom out
Zoom in
Previous page
1/122
Next page
32 MS 240, MS 260, MS 260 C
: Place the heat shield (1) in
position (if fitted) and use the
indentations (arrows) to line it up
on the sealing face of the cylinder
exhaust port.
: If the heat shield is fitted, position
the gasket (1) between the
projections (arrows)
– the gasket is now held in
position.
Versions without heat shield:
Place gasket (1) on the cylinder
exhaust port, the raised edge
must face the port and the holes
must be in alignment.
165RA092 TG
1
165RA093 TG
1
Carefully place the muffler (1) in
position.
: Line up the screws (arrows) and
check the position of the gasket.
: Insert screws (2) to hold the
muffler in position.
: Insert screws (arrows) and
tighten them down firmly.
Remove the screws used to hold
the muffler in position.
: Attach tab (arrow) of the exhaust
casing (1) to the muffler first and
then swing it into position.
165RA094 TG
1
2
2
1
165RA095 TG
: Insert screws (arrows) and
tighten them down firmly.
Tightening torques, b 3.5
8.2 Leakage Test
Defective oil seals and gaskets or
cracks in castings are the usual
causes of leaks. Such faults allow
supplementary air to enter the
engine and upset the fuel-air
mixture.
This makes adjustment of the
prescribed idle speed difficult, if not
impossible.
Moreover, the transition from idle
speed to part or full throttle is not
smooth.
Always perform the vacuum test
first and then the pressure test.
The engine can be checked
thoroughly for leaks with the pump
0000 850 1300.
165RA084 TG
1
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info