537132
20
Zoom out
Zoom in
Previous page
1/122
Next page
19MS 240, MS 260, MS 260 C
5. Cutting Attachment
Wear gloves to protect your hands
from injury.
: Unscrew the hex nuts (1).
: Remove the chain sprocket
cover (2).
: Remove the guide bar (3) with
chain.
Reassemble in the reverse
sequence.
Versions with Quick Chain
Tensioner
Wear gloves to protect your hands
from injury.
: Swing the wing nut (1) upright
and loosen it counterclockwise.
: Remove the sprocket cover (2)
and tensioning gear (3) with
guide bar (4).
Reassemble in the reverse
sequence.
1
2
3
165RA002 TG
2
1
4
165RA464 TG
3
: Carefully pry the wing nut (1) out
of the sprocket cover (arrow).
Check the wing nut (1) and
replace if necessary
Swing the wing nut (1) upright.
: Push the wing nut (1), thin side
first (see arrow), into the opening
and press it down until it snaps
into positon.
: Take out the screw (arrow).
Remove the cover plate (1) and
adjusting wheel (2).
1
165RA469 TG
1
165RA007 TG
1
165RA455 TG
2
When installing the adjusting wheel,
make sure its teeth point
inboard.
Reassemble in the reverse
sequence.
5.1 Chain Catcher
Remove the sprocket cover and
cutting attachment, b 5
: Take out the screw (arrow) and
remove the chain catcher (1).
Reassemble in the reverse
sequence.
Tightening torques, b 3.5
165RA247 TG
1
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info