537132
9
Zoom out
Zoom in
Previous page
1/122
Next page
8 MS 240, MS 260, MS 260 C
Fastener Thread size For component Torque
Nm
Remarks
Screw M 5x12 Muffler/crankcase/cylinder (MS 240) 10.0 1), 4)
Nut M 8x1 Flywheel 33.0 3)
Screw M 4x8 Side plate/crankcase 3.0 4)
Screw M 4x16 Side plate/crankcase (quick chain tensioner) 3.0
Screw M 3x20 Clamp/manifold 0.5
M 5x8.5 Stud/cylinder 1.4 2)
Nut M 5 Carburetor 3.5
Screw M 5x20 Cylinder/crankcase 11.0 2), 4)
M 14x1.25 Spark plug 25.0
Screw M 5x20 Ignition module/crankcase (micro-
encapsulated)
7.0 4)
Remarks:
1) Loctite 242 or 243, medium strength
2) Loctite 270, high strength
3) Degrease crankshaft/flywheel and mount oil-free
4) Screws with binding head
Use the following procedure when refitting a DG or P screw in an existing thread:
Place the screw in the hole and rotate it counterclockwise until it drops down slightly.
Tighten the screw clockwise to the specified torque.
This procedure ensures that the screw engages properly in the existing thread and does not form a new thread
and weaken the assembly.
Coat micro-encapsulated screws with medium strength Loctite 242 or 243 before reinstalling.
Power screwdriver setting for polymer: DG and P screws max. 500 rpm
Do not use an impact wrench for releasing or tightening screws.
Do not mix up screws with and without binding heads.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info