52239
35
Zoom out
Zoom in
Previous page
1/98
Next page
34
english
HT 70, HT 75
: Carefully remove the parts of the old
spring from the starter cover and
rope rotor.
: Insert the new rewind spring in the
rope rotor and, at the same time,
engage the outer spring loop in the
rotor’s recess – the wire retainer
slips off in this process.
If the spring pops out and uncoils,
refit it in the counterclockwise
direction, starting outside and
working inwards.
: Go to "Installing the Rope Rotor".
Installing rope rotor with rewind
spring
: Carefully unpack the new rope rotor
with rewind spring. The spring may
pop out if not handled with care –
risk of injury.
: Lubricate the spring with a few
drops of non-resinous oil – see
"Special Accessories".
: Go to "Installing the Rope Rotor".
Installing the Rope Rotor
: Check dimension a for inner spring
anchor loop and bend it slightly if
necessary.
: Coat rope rotor bearing bore with
non-resinous oil – see "Special
Accessories".
: Slide the rotor onto the starter post –
turn it back and forth until the rewind
spring anchor loop (8) engages.
: Insert the screw (5) and tighten it
down securely.
: Go to "Tensioning the Rewind
Spring".
Tensioning the Rewind Spring
: Make a loop in the unwound
starter rope and use it to turn
the rope rotor six full revolutions
counterclockwise. Hold the rotor
steady – straighten the twisted rope
– release the rotor –
let go of rope slowly so that it winds
onto the rotor.
: Check spring tension:
The starter grip must be firmly
seated in the rope guide bush.
If the grip droops to one side: Add
one more turn on rope rotor to
increase spring tension.
When the starter rope is fully
extended it must be possible to
rotate the rotor another half turn. If
this is not the case, the spring is
overtensioned and could break.
Take one turn of rope off the rotor.
: Go to "Fitting the Starter Cover".
a
389BA029 KN
a = 2mm
(0.08 in)
8
392BA025 KN
392BA044 KN
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl HT75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl HT75 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl HT75

Stihl HT75 User Manual - English - 118 pages

Stihl HT75 User Manual - German - 48 pages

Stihl HT75 User Manual - Spanish - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info