537289
9
Zoom out
Zoom in
Previous page
1/104
Next page
FW 20 - TS 700, TS 800
English
7
Mounting the throttle control
N Twist off and remove the button (1)
on the lever which controls the
cutting depth adjustment
N Unscrew the screws (2) and remove
the moldings
Mounting the throttle cable
N Push the throttle cable support (1)
on to the handle (2) from the side
and engage in position
N Secure the throttle cable support
with the rubber strap (3)
N Unscrew and remove the upper
hexagon nut from the screw sleeve
of the throttle cable
N Guide the throttle cable nipple (4)
and screw sleeve through the
support (5)
N Screw on hexagonal nut (6)
N Hook the throttle cable nipple into
the hole (A)
Adjusting the throttle cable
N Set the bracket bow to the full-
throttle position
N Tighten the throttle cable at the
lower nut
until the lever (7) reaches the stop
throttle lever in full throttle position
N Tighten the hexagon nut (6)
N Release the bow – Idle position –
the cut-off machine throttle lever
must be in the idle position
N Screw the two moldings back
together again and screw the knob
back on to the lever
Dismounting the cut-off machine
N Press down the locking pawl on the
locking lever and turn the locking
lever away from the hand guard
N Release the rubber strap from the
throttle cable support and remove
the throttle cable support from the
handle
N Lift out the cut-off machine
2
1
2
2
2
2
2
2
379BA020 KN
1
379BA030 KN
1
2
379BA031 KN
3
379BA029 KN
4
6
5
4
6
5
379BA042 KN
6
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FW 20 - TS 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FW 20 - TS 800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info