537287
9
Zoom out
Zoom in
Previous page
1/108
Next page
FW 20 - TS 410, TS 420, TS 500i
English
7
N Lower the tube (3) and at the same
time lift the locking lever (4) to the
raised position
N Holding the tube firmly down, press
down the locking lever and engage
it on the handlebar.
Mounting the throttle control
N Twist off and remove the button (1)
on the lever which controls the
cutting depth adjustment
N Unscrew the screws (2) and remove
the half of the housing
Replacing the carrier
N Carriers (3) with only one hole must
be replaced with carriers (4) from
the mounting kit
Mounting the throttle cable
N Guide the throttle cable nipple (5)
and screw sleeve through the
support (6)
N Screw on hexagonal nut (7)
N Nest the throttle cable nipple in the
holding hole (B)
Adjusting the throttle cable
N Set the bracket bow to the full-
throttle position
N Tighten the throttle cable at the
lower nut
until the lever (9) rests against the
end-stop the throttle cable must be
located in the guide, with the throttle
lever in the full-throttle position
N Tighten up the hexagon nut (8)
N Release the bow – Idle position –
the cut-off machine throttle lever
must be in the idle position
Readjusting the throttle cable
When the cut-off machine is mounted,
the throttle cable can be readjusted if
necessary.
539BA004 KN
4
3
2
1
2
2
2
2
2
2
379BA020 KN
1
4
379BA021 KN
3
5
7
6
539BA005 KN
B
379BA047 KN
8
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FW 20 - TS 500i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FW 20 - TS 500i in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info