537286
8
Zoom out
Zoom in
Previous page
1/108
Next page
FW 20 - TS 410, TS 420, TS 500i
English
6
A basic machine and an attachment kit
are combined to produce a complete
cart FW 20.
The complete instruction manual for the
cart FW 20 therefore consists of two
instruction manuals – one for the basic
machine FW 20 and one for the
attachment kit FW-TS.
Always read both instruction manuals
carefully before using your machine for
the first time and keep them safe for
future reference.
Additionally, observe the instruction
manual of the cut-off machine used.
Installing the mount
N Raise the tube (1) to the up position
N Insert screws (2) M8x25 from above
through the oblong holes in the
mount (3)
N Position the mount (3) so that the
notch (4) in the upper oblong hole is
centered in relation to the screw
N Screw on and tighten the hexagon
nuts with washers
Mounting the cut-off machine
N Position the cut-off machine so that
the pins (1) protrude into the holes
in the support (2)
Aligning the clamping plate to the guard
Outer mounting of the guard
N Mount the clamping element in
position A
Inner mounting of the guard
N Mount the clamping element in
position B
Cut-off machine cart
379BA049 KN
+
+
.....
Mounting
2
1
379BA048 KN
1
2
2
1
539BA002 KN
539BA003 KN
A
B
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FW 20 - TS 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FW 20 - TS 420 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info