635888
42
Zoom out
Zoom in
Previous page
1/480
Next page
FSA 90, FSA 90 R
English
40
Transporting
Before transporting – even for short
distances – always switch off the
machine, move the retaining latch to ƒ
and remove the battery. This avoids the
risk of the motor starting unintentionally.
Carry the unit horizontally and properly
balanced by the drive tube.
To reduce the risk of cut injuries, fit
transport guard on a metal cutting
attachment, even when carrying the tool
for short distances.
Transporting by vehicle: Properly secure
the power tool to prevent turnover and
damage.
Cleaning
Clean plastic surfaces with a cloth. Do
not use aggressive detergents. They
may damage the plastic.
Always clean dust and dirt off the power
tool do not use any grease solvents for
this purpose.
Clean the cooling slots if necessary.
Keep the battery guides free from
foreign matter – clean as necessary.
Do not use a pressure washer to clean
the unit. The solid jet of water may
damage parts of the unit.
Do not spray the power tool with water.
Do not spray the cutting attachment or
deflector with water or immerse them in
water as this may damage the drive
motor and electronic control unit in the
motor housing.
Accessories
Only use cutting attachments and
accessories that are explicitly approved
for this power tool by STIHL or are
technically identical. If you have any
questions in this respect, consult a
servicing dealer. Use only high quality
tools and accessories in order to avoid
the risk of accidents and damage to the
unit.
STIHL recommends the use of genuine
STIHL tools and accessories. They are
specifically designed to match the
product and meet your performance
requirements.
Drive
Battery
Observe the supplement sheet or
instruction manual for the STIHL battery
and keep in a safe place.
Further safety instructions – see
www.stihl.com/safety-data-sheets
Battery charger
Observe the supplement sheet for the
STIHL charger and keep in a safe place.
Symbols on Deflectors
An arrow on the deflector shows the
correct direction of rotation of the cutting
attachments.
Some of the following symbols are
applied to the outside of the deflector to
indicate the approved combination of
cutting attachment and deflector.
Deflector may be used
with mowing heads.
Deflector may be used
with grass cutting blades.
Deflector must not be
used with mowing heads.
Deflector must not be
used with grass cutting
blades.
Deflector must not be
used with brush knives.
Deflector must not be
used with circular saw
blades.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FSA 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FSA 90 in the language / languages: All languages as an attachment in your email.

The manual is 14,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FSA 90

Stihl FSA 90 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info