Manual Stihl FSA 85 (page 38 of 408) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

537275

Zoom out

Zoom in

1/408

FSA 65, FSA 85

English

The cutting attachment may catch and

fling objects a great distance and cause

injury - therefore, do not allow any other

persons within a radius of 15 meters of

your own position. To reduce the risk of

damage to property, also maintain this

distance from other objects (vehicles,

windows). Even maintaining a distance

of 15 meters or more cannot exclude the

potential danger.

Do not leave the machine outdoors in

the rain.

Do not cut wet grass.

Take special care in slippery conditions

(ice, wet ground, snow), on slopes or

uneven ground.

Watch out for obstacles: Roots, tree

stumps or holes which could cause you

to trip or stumble.

To reduce the risk of accidents, take a

break in good time to avoid tiredness or

exhaustion.

Work calmly and carefully – in daylight

conditions and only when visibility is

good. Stay alert so as not to endanger

others.

If your power tool is subjected to

unusually high loads for which it was not

designed (e.g. heavy impact or a fall),

always check that it is in good condition

before continuing work – see also

"Before Starting Work". Make sure the

safety devices are working properly. Do

not continue operating your power tool if

it is damaged. In case of doubt, consult

your servicing dealer.

Special care must be taken when

working in difficult, over-grown terrain.

The dust that occurs during operation

may be harmful to health. If dust levels

are very high, wear a suitable respirator.

Before leaving the power tool

unattended: Always switch off the power

tool, set the retaining latch to ƒ and

remove the battery.

Check the cutting attachment at regular

short intervals during operation or

immediately if there is a noticeable

change in cutting behavior:

– Switch off the motor, move the

retaining latch to ƒ and wait for the

cutting attachment to come to a

standstill, remove the battery.

– Check condition and tightness, look

for cracks.

Clean grass and plant residue off the

cutting attachment mounting at regular

intervals – remove any build up of

material from the cutting attachment and

deflector.

To replace the cutting attachment,

switch off the power tool, move the

retaining latch to ƒ and remove the

battery. This avoids the risk of injury

from the motor starting unintentionally.

Never continue using or attempt to

repair damaged or cracked cutting

attachments.

This may cause parts of the cutting

attachment to come off and hit the

operator or bystanders at high speed

and result in serious or fatal injuries.

Use only the deflector with properly

mounted line limiting blade to ensure the

mowing lines are automatically trimmed

to the approved length.

After Finishing Work

Always clean dust and dirt off the power

tool with a cloth – do not use any grease

solvents for this purpose.

The drive motor is not

waterproof. Never work

with the power tool in the

rain or in wet or very

damp locations.

15m (50ft)

To reduce the risk

of injury from

thrown objects,

never operate the

power tool without

the proper deflec-

tor for the type of

cutting attachment

being used.

Inspect the work area:

Stones, pieces of metal

or other solid objects may

be thrown more than 15

meters and cause per-

sonal injury or damage

the cutting attachment

and property (e.g. parked

vehicles, windows).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FSA 85 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stihl FSA 85 Manual

Product: