FS 130, FS 130 R
English
14
The following STIHL attachments may
be mounted to the basic power tool:
Mounting Bike Handle with Swivelling
Handle Support
The machine is supplied with the
swiveling handle support already
mounted on the shaft. To mount the
handlebar it is necessary to remove the
clamp moldings.
Removing the clamp moldings
N Hold the lower clamp (1) and upper
clamp (2) firmly together.
N Release the wing screw (3) – the
clamps are loose once the wing
screw has been released. They are
pushed apart by the two
springs (4 and 5).
N Pull out the wing screw – the
washer (6) remains on the wing
screw.
N Separate the clamp moldings – the
springs (4 and 5) remain in the
lower clamp.
Securing the handlebar
N Place the handlebar (7) in the lower
clamp (1) so that distance A is no
more than 15 cm (6 in).
N Place the upper clamp in position
and hold both clamp moldings
together.
N Push the wing screw through the
two clamps as far as stop – hold all
parts together and secure them.
Approved Power Tool
Attachments
Interchangeable
attachment
1)
not approved for bike-handled
machines
2)
use handle hose supplied with the
machine
Application
BF Pick tines
HL 135°
1)
Long reach hedge
trimmer
HT
1)
Pole pruner
SP
1) 2)
Special harvester
