476165
16
Zoom out
Zoom in
Previous page
1/90
Next page
15FS 500, FS 550
English / USA
Using the grass cutting blade
All kinds of grass and weeds can be
easily cut with the grass cutting blade.
The clearing saw is swept in an arc
similar to a scythe.
!Warning!
To reduce the risk of serious or fatal
injury never attempt to cut woody
materials.
The 4-tooth grass cutting blade is
intended to cut grass and weeds. It has
4 cutting knives with cutting edges on
both sides, i.e. front and rear.
The 8-tooth grass cutting blade is
recommended for cutting fern or reed.
Both blades have to be resharpened
when all cutting edges are dull.
Using the brush knife
When fitted to the clearing saw, the
brush knife is suitable for applications
ranging from cutting matted grass to
clearing weeds, wild growth and scrub.
To cut wild growth and scrub, lower the
rotating brush knife down onto the
growth to achieve a chopping effect. Use
the clearing saw like a scythe to cut
grass, i.e. sweep it to and for in an arc.
!Warning!
When cutting woody materials, use the
left side of the blade to avoid "kickout"
(blade thrust) situations.
!Warning!
Improper use of a brush knife may cause
it to crack, chip or shatter.
Thrown parts may seriously injure the
operator or bystanders. To reduce the
risk of personal injury it is essential to
take the following precautions:
Avoid contact with hard or solid foreign
objects such as stones, rocks or pieces
of metal.
Never cut wood or shrubs with a stem
diameter of more than 2 cm (3/4") use
a circular saw blade for such work.
Inspect the brush knife at regular short
intervals for signs of damage. Do not
continue working with a damaged brush
knife. Resharpen the brush knife
regularly (when it has dulled noticeably).
!Warning!
When cutting young saplings or other
woody materials up to 2 cm (3/4") in
diameter, use left side of the blade to
avoid "kickout" situations (see
appropriate section in this manual). Do
not attempt to cut woody material with a
larger diameter, since the blade may
catch or jerk the clearing saw forward.
This may cause damage to the blade or
clearing saw or loss of control of the
clearing saw, resulting in personal injury.
000BA020 KN
002BA066 KN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS500 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FS500

Stihl FS500 User Manual - German - 176 pages

Stihl FS500 Additional guide - Dutch - 20 pages

Stihl FS500 User Manual - Dutch, French, Italian - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info