Manual Stihl FS36 (page 10 of 31) (English)

667267

Zoom out

Zoom in

1/31

Always hold the trimmer firmly with both

hands. Wrap your fingers tightly around

the handles, keeping the handles

cradled between your thumb and fore-

finger. Keep your hands in this position,

to have your trimmer under control at all

times. Make sure your trimmer handles

and grip are in good condition and free

of moisture, pitch, oil or grease.



:DUQLQJ

Never attempt to operate any trimmer

with one hand. Loss of control of the

trimmer resulting in serious or fatal injury

may result.

To reduce the risk of bodily injury

resulting from loss of control and/or

contact with the cutting tool, make sure

your unit is equipped with the proper

handle and harness for the type of

cutting attachment being used (see

chart in chapter on "Selecting the

Cutting Tool").

Special care must be taken in slippery

conditions (wet ground, snow) and in

difficult, overgrown terrain. Watch for

hidden obstacles such as tree stumps,

roots and ditches to avoid stumbling.

Before cutting, inspect the

area for stones, glass,

pieces of metal, trash or

other solid objects. The

cutting attachment could

throw objects of this kind.

To reduce the

risk of injury

from thrown

objects and

blade contact,

never operate a trimmer without a

properly mounted deflector. Keep the

deflector (and the skirt where appropri-

ate) adjusted properly at all times (see

chapter on mounting the various cutting

tools of your owner’s manual). Do not

overreach. Keep proper footing and

balance at all times.



:DUQLQJ

This trimmer is normally to be used at

ground level with the cutting attachment

parallel to the ground. Use of a trimmer

above ground level or with the cutting

attachment perpendicular to the ground

may increase the risk of injury, since

the cutting attachment is more fully

exposed and the trimmer may be more

difficult to control. Never use your

trimmer as a hedge trimmer.

Do not operate using the starting

throttle lock as you do not have control

of the engine speed. See section of your

owner’s manual on the proper use of the

slide control.

If the cutting tool or deflector becomes

clogged or stuck, always turn off the

engine and make sure the cutting tool

has stopped, before cleaning. Grass,

weeds, etc. should be cleaned off the

cutting tool at regular intervals.



:DUQLQJ

During cutting, check the tightness and

the condition of the cutting tool at

regular intervals. If the behavior of the

tool changes, stop the engine im-

mediately, and check the nut securing

the tool for tightness and the cutting

tool for cracks and damage. Replace

damaged cutting tools immediately.

Such tools may shatter at high speed

and cause serious or fatal injury.

002BA057 KN002BA056 KN



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS36 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stihl FS36 Manual

Product: