667322
51
Zoom out
Zoom in
Previous page
1/57
Next page
o
o
If the spring has popped out and
uncoiled:
Wind up the spring clockwise, from
the inside outwards, until its overall
diameter is
50mm
(2").
Use pointed nose pliers to grip
spring about 10mm
(318")
from the
outer loop and refit
it.
Install the rope rotor.
50
Tensioning the rewind spring
Make a loop
in
the starter rope and
use it to turn the rope rotor seven
full revolutions counterclockwise.
Hold the rotor steady - straighten
the twisted rope - release the rotor.
Let go of rope slowly so that
it
winds onto the rotor.
The
starter grip must be firmly seated
in
the rope guide bush.
If grip droops to one side:
Add one more turn on rope rotor
to increase spring tension.
When
starter rope is fully extended it
must be possible to rotate the rotor
'-
another half turn.
If this is not the case, the spring
is overtensioned and could break.
Take one turn of rope off the rotor.
Refit and secure the starter cover
and machine support.
51


Need help? Post your question in this forum.

Forumrules
1

Forum

stihl-fs-88

Reset search

  • Dobrý den tomasek.zdice@seznam.cz dotaz . nemecky by nebyla? Submitted on 23-6-2021 at 17:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 88 in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info