667322
45
Zoom out
Zoom in
Previous page
1/57
Next page
~A
o
~c
m
B
~
,---~-----a'i
:;:;
..,
3
2
=:JJ
.......
__
4
__
Sharpen correctly
If
slightly dull:
Use flat file (4) 0814 212
3310-
In
case of more serious wear or
nicks: Resharpen with a grinder -
maintain a sharpening angle of
30° (A) on the cutting edge (1).
File back the cutting edge
parallel to the lines (B) (see
illustration).
Resharpen frequently, take
away as little material as
possible - two or three strokes
of
the file are usually enough.
44
Grass cutting blade 230-8
Never straighten
or
weld a bent or
cracked cutting blade -
it
might
shatter and cause serious
or
fatal injury.
Resharpen when the tips of the
cutting edges (1) have worn
down to about 1mm/3/64" (A).
To
avoid out-of-balance:
Resharpen the cutters (2)
uniformly - do not alter the contour
of the parent blade (3) in any
way.
After resharpening about 5 times,
have blade checked on STIHL
balancer 5910 850 2600 and
rebalanced as necessary.
Measurements and angles for
resharpening
Leave clearance of 2mm/5/64" (B)
between cutting edge and parent
blade -
R1
should be 2mm/5/64".
Radius R2
is
2.5mmf7164" and
is
obtained automatically if you use the
specified file and maintain a filing angle
of 30° (C).
Cutting edge
(0) must be exactly
in
line
with center of blade's mounting hole.
45


Need help? Post your question in this forum.

Forumrules
1

Forum

stihl-fs-88

Reset search

  • Dobrý den tomasek.zdice@seznam.cz dotaz . nemecky by nebyla? Submitted on 23-6-2021 at 17:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 88 in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info