537257
39
Zoom out
Zoom in
Previous page
1/98
Next page
38
English / USA
FS 300, FS 350, FS 400, FS 450, FS 480
: Place spring with frame in position
– check that outer spring loop (8) is
correctly seated.
: Use a suitable tool to push the
spring into the housing. Apply tool
through the openings (see arrows).
The frame slips off in this process.
If the spring pops out and uncoils during
installation: Refit it in the spring housing
in the counterclockwise direction – start
outside and work inward.
: Fit the screw.
: Install the rope rotor as described in
"Replacing the Starter Rope".
: Tension the rewind spring.
: Fit the fan housing.
FS 300, 350
: Take out the screws (9).
: Remove the spring housing and
parts of old spring.
: Lubricate the new spring spring in
the new spring housing with a few
drops of non-resinous oil (Special
Accessories).
: Fit new spring with spring housing –
bottom plate must face up.
If the spring pops out and uncoils during
installation: Refit it in the spring housing
in the clockwise direction – start outside
and work inward.
: Fit the screws.
: Install the rope rotor as described in
"Replacing the Starter Rope".
: Tension the rewind spring.
: Fit the fan housing.
For periods of about 3 months or longer
: Drain and clean the fuel tank in a
well ventilated area.
: Dispose fuel properly in accordance
with local environmental
requirements.
: Run engine until carburetor is dry –
this helps prevent carburetor
diaphragms sticking together.
: Remove, clean and inspect the
cutting tool.
: Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
: Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
8
271BA038 KN
9
9
271BA039 KN
Storing the Machine
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS 480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 480 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FS 480

Stihl FS 480 User Manual - German - 168 pages

Stihl FS 480 Additional guide - Dutch - 20 pages

Stihl FS 480 User Manual - Dutch, French, Italian - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info