Manual Stihl FS 410 C K (page 7 of 48) (English)

537262

Zoom out

Zoom in

1/48

FS 410 C, FS 410 C L

English

– Keep the handles dry and clean –

free from oil and dirt – for safe

control of the power tool.

– Adjust the harness and handle(s) to

suit your height and reach. See

chapters on "Fitting the Harness"

and "Balancing the Machine".

To reduce the risk of accidents, do not

operate your power tool if it is damaged

or not properly assembled.

If you use a shoulder strap or full

harness: Practice removing and putting

down the machine as you would in an

emergency. To avoid damage, do not

throw the machine to the ground when

practicing.

Starting the Engine

Start the engine at least 3 meters from

the fueling spot, outdoors only.

Place the unit on firm ground in an open

area. Make sure you have good balance

and secure footing. Hold the unit

securely. The cutting attachment must

be clear of the ground and all other

obstructions because it may begin to run

when the engine starts.

Your power tool is a one-person unit. To

reduce the risk of injury from thrown

objects, do not allow other persons

within a radius of 15 meters of your own

position – even when starting.

Check idle speed setting: The cutting

attachment must not rotate when the

engine is idling with the throttle trigger

released.

To reduce the risk of fire, keep hot

exhaust gases and hot muffler away

from easily combustible materials (e.g.

wood chips, bark, dry grass, fuel).

Holding and Controlling the Power Tool

Always hold the power tool firmly with

both hands on the handles.

Make sure you always have good

balance and secure footing.

Right handle on control handle, left hand

on left handle.

During Operation

Make sure you always have good

balance and secure footing.

In the event of imminent danger or in an

emergency, press the stop switch to

shut off the engine.

The cutting attachment may catch and

fling objects a great distance and cause

injury - therefore, do not allow any other

persons within a radius of 15 meters of

your own position. To reduce the risk of

damage to property, also maintain this

distance from other objects (vehicles,

windows). Even maintaining a distance

of 15 meters or more cannot exclude the

potential danger.

The correct engine idle speed is

important to ensure that the cutting

attachment stops rotating when you let

go of the throttle trigger.

Check and correct the idle speed setting

regularly. If the cutting attachment

continues to rotate when the engine is

idling, have the machine checked by

your servicing dealer. STIHL

recommends an authorized STIHL

servicing dealer.

Take special care in slippery conditions

(ice, wet ground, snow), on slopes or

uneven ground.

To reduce the risk of

injury, avoid contact with

the cutting attachment.

Do not drop start the

power tool – start the

engine as described in

the instruction manual.

Note that the cutting

attachment continues to

run for a short period

after you let go of the

throttle trigger – flywheel

effect.

002BA480 KN

15m (50ft)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 410 C K in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FS 410 C K

Stihl FS 410 C K User Manual - German - 152 pages

Stihl FS 410 C K Additional guide - Dutch - 20 pages

Stihl FS 410 C K User Manual - Dutch, French, Italian - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stihl FS 410 C K Manual

Product: